Our Experience. Your Signature.

314

Cope & Stick Door Style

This door features a louvered panel. Panel sizes are limited to accommodate louver dimensions and louvers are not operational.

Construction: Cope & Stick Specialty Panel: Frame: 2-1/4″; Center Panel: louver; Inside Edge Profile: Square Edge; Outside Edge Profile: E104; Drawer Front: Slab

Featured in Maple Paint Grade: Desert Sand

Select the image link to view materials in our stock finishes

WOODS & FINISHES

Disclaimer: Please be aware that the accuracy of color shown on your computer screen will vary based on your monitor and screen resolution. Colors are also impacted by variations in the characteristics inherent to the specie. Finish selections should always be made after sourcing door and/or finish samples. The Valley Cabinet finish program is here to help personalize your selection to achieve the desired performance and look of your cabinetry. Our Experience. Your Signature.

Related Door Styles

Beauty is in the details...

Door Construction

Cope & Stick

Pinless technique.
Utmost quality.

There’s no questions about it. Cope and Stick joinery produces a great look for cabinet door frames. “Stick” is the molded edge cut along the frame’s inside edge. Any piece that meets that molding must match the profile by being “coped.” This subtle technique replaces the typical round-over profile with a clean and square corner. The tenon on Valley Cabinet's Cope and Stick doors and drawer fronts is 5/8″ long and provides the strongest joint available.

KEY ADVANTAGES:

Standard door frame width is 2-1/4”
Constructed using the pinless technique in a rotary clamp
Standard frame size on 5-piece drawer fronts is 1-1/4″ top and bottom rails with the stiles 2-1/4″ wide
We do not pin the backside of our frames, just clamp

Widths & Heights

Size Limitations:
314 Door: 2-1/4" rails

Also available in 3" rails.

Standard top and bottom rail heights are 2-1/2". Panel area between top and bottom rails must be measured in 1-1/2" increments to accommodate the louvers. Louvers are not operational.

Because the louver panel height must be figured in 1-1/2" or 3" height increments, the top and bottom rails of each door will be cut down if needed to accommodate the overall size of the door. The louvers are not operational.

2 1⁄4" Frame
Minimum: 9 7⁄16" x 6 1⁄2"

Midrail - Midrail FYI

To guarantee against warping, doors that are 48" or taller will automatically have a center rail added unless specified as “single panel" by the customer. Center rails are 2 1⁄2" wide unless otherwise specified and will match the inside edge profile. Doors over 24" wide with a single panel will not be warrantied. Standard frame size on 5-piece drawer fronts is 1 1⁄4" top and bottom rails with the stiles 2 1⁄4" wide to match the door unless otherwise specified. Wider or narrower frames are available upon request. If making the door 2 panels high, add a "5" to the door style name.

Drawer Front

Drawer Fronts: Click to View our Selection of Drawer Inserts
Standard frame width on all Cope & Stick drawer fronts is 1 3⁄4".

Slab