Our Experience. Your Signature.
Contact Us
Careers

401(3)

Cope & Stick Door Style

This door features a flat panel. Are you looking for the raised panel version?  See 301(3).

401(3)-Maple-Emerald

Construction: Cope & Stick Flat Panel: Frame: 3″; Center Panel: 1/4″ Panel; Inside Edge Profile: SR80; Outside Edge Profile: E131; Drawer Front: Slab

Featured in Maple: Emerald

Select the image link to view materials in our stock finishes

WOODS & FINISHES

Disclaimer: Please be aware that the accuracy of color shown on your computer screen will vary based on your monitor and screen resolution. Colors are also impacted by variations in the characteristics inherent to the specie. Finish selections should always be made after sourcing door and/or finish samples. The Valley Cabinet finish program is here to help personalize your selection to achieve the desired performance and look of your cabinetry. Our Experience. Your Signature.

Related Door Styles

P_401_Hickory-Calico_1-4-Panel_E-154_SR-22_Beachwood-Satin
401
P_335WG_SR-20G_E-106_Maple-Hard-White_Lava-Stone-Satin-2
335WG
Wilmington_Cherry_Carmel-Brown-pposlhvttmog44nqbvew5k4bci08zul98chig94m28
301(3)
DOOR STYLE GALLERY
Designer Showcase Gallery
ACCESSORY GALLERY

Beauty is in the details...

Cope & Stick

Pinless technique.
Utmost quality.

There’s no questions about it. Cope and Stick joinery produces a great look for cabinet door frames. “Stick” is the molded edge cut along the frame’s inside edge. Any piece that meets that molding must match the profile by being “coped.” This subtle technique replaces the typical round-over profile with a clean and square corner. The tenon on Valley Cabinet's Cope and Stick doors and drawer fronts is 5/8″ long and provides the strongest joint available.

KEY ADVANTAGES:

  • Standard door frame width is 2-1/4”
  • Constructed using the pinless technique in a rotary clamp
  • Standard frame size on 5-piece drawer fronts is 1-1/4″ top and bottom rails with the stiles 2-1/4″ wide
  • We do not pin the backside of our frames, just clamp

Size Limitations:
401(3) Door: 3" rails

Minimum Sizes

3" Frame
Minimum: 8 3⁄4" x 7"

Midrail - Midrail FYI

To guarantee against warping, doors that are 48" or taller will automatically have a center rail added unless specified as “single panel" by the customer. Center rails are 2 1⁄2" wide unless otherwise specified and will match the inside edge profile. Doors over 24" wide with a single panel will not be warrantied. Standard frame size on 5-piece drawer fronts is 1 1⁄4" top and bottom rails with the stiles 2 1⁄4" wide to match the door unless otherwise specified. Wider or narrower frames are available upon request.   If  making the door 2 panels high, add a "5" to the door style name.

Drawer Fronts: Click to View our Selection of Drawer Inserts
Standard frame width on all Cope & Stick drawer fronts is 1 3⁄4".

Slab

DF401

Minimum width: 7 1⁄4"

DF401(3-S)

Minimum width: 8 3⁄4"

401H

Minimum width: 7 1⁄4"

401 H(3)

Minimum width: 8 3⁄4"

 

Hinging applies to the traditional framed construction of Valley Cabinet.  

  • Standard Overlay - Yes
  • Full Overlay - Yes
  • Flush Inset - Yes
  • Beaded Inset - Yes 

Note:  Click on the individual diagrams to view an example of the profile in natural maple.

If adding mullions to your door style, you will need to reference the inside edge profile to select the coordinating mullion. Mullions are shown in the Mullion Options Tab.

Not recommended with painted finishes

Available on square doors only

Only available with P204, P210 or 1/4" panel. Available on square doors only

No mullion options available for this profile

Only available with P204, P210 or 1/4" panel.

Only available with P204, P210 or 1/4" panel. Available on square doors only

*Restricted Outside Edge Profiles

Available on square doors only.

*Restricted Outside Edge Profiles

  
  • SR40 and SR45 profiles are limited to the following outside edge profiles: E103; E104; E105; E121; E123; E127 and E154

Note:  Click on the individual diagrams to view an example of the panel in natural maple.

  

To achieve a flat panel with a rustic specie, choose 301 door with P212.

Mullion profiles coordinate with inside edge profiles. Consult the Mullion tab for details.

301WG

390WG

391WG

393WG

346WG

The connecting vertical mullion will be 3" long. Only available with SR10, SR20, SR30, SR35 & SR80

347WG

The connecting vertical mullion will be 3" long. Only available with SR10, SR20, SR30, SR35 & SR80

342WG

Not available with SR107 mullion

394WG

The center diamond pattern will be connected to the frame on three sides with 2" long mullion pieces.

Not available with SR70, SR86 or SR107

348WG

Oval is centered in the frame. 2" mullions on left/right and equal spacing for top/bottom.

Available with SR10, SR20, SR30, SR35 & SR80

349WG

Oval has 2" mullions on left/right and top.

Available with SR10, SR20, SR30, SR35 & SR80

392WG / 392-2WG / 392-3WG

Door style 392-WG will have size limitations for the “X” pattern mullion. Generally, if the height exceeds approximately 1.5 times the width then a double high “X” pattern is required. If the height exceeds approximately 2.5 times the width, then a triple high “X” pattern is required. The horizontal mullion dividing the “X” patterns is optional.

For a large single “X” pattern, minimum width is 14".

333WG

Only available with SR10, SR20, SR30, SR35 & SR80

335WG

Only available with SR10, SR20, SR30, SR35 & SR80

336WG

Only available with SR10, SR20, SR30, SR35 & SR80

337WG

Only available with SR10, SR20, SR30, SR35 & SR80

338WG

Only available with SR10, SR20, SR30, SR35 & SR80

 

 
  • Any glass door can be made with woodgrills. You must specify the number of lites needed
  • Mullions are NOT true divided lite doors
  • Special mullion placements are available - please submit sketch for pricing
  • All minimums are based on a 2 1⁄4" frame width
  • Doors are drawn at 16" x 24" or 16" x 30" - doors ordered smaller or larger than that size will not look like the picture depicts
  • Standard placement of mullions is to divide the opening equally as follows:
    4 lites: 8" high to 22" high
    6 lites: 22 1⁄16" high to 38" high
    8 lites: 38 1⁄16" high to 60" high

Additional note for wireframe inserts: Antique finishes may have slight color variations to replicate the charm of natural aging and patina. Additional glass and wireframe styles are available, consult with your Valley Cabinet Design Specialist.

Note:  Click on the individual diagrams to view an example of the panel in natural maple.

Reference the inside edge profile to select the coordinating mullion profile.

SR-10

Used with SR10 & SR77

SR-15

Used with SR15 & SR22

SR-20

Used with SR20 

SR-30

Used with SR30 & SR31

SR-35

Used with SR35

SR-37

Used with SR37

SR-40

Used with SR40

SR-42

Used with SR42

SR-45

Used with SR45

SR-65

Used with SR65

SR-70

Used with SR70

SR-80

Used with SR80

SR-86

Used with SR86

SR-107

Used with SR107

SR-122

Used with SR122

401(3)AM

V-100

Eligible Panel Profiles:

P-201 Deep; P-217 Deep; P-209 Deep; P-204; 1/4" Panel

Minimum Door Size:
8-5/8" x 8-5/8"

Minimum Drawer Size:
8-5/8" x 7-1/8"

V-102

Eligible Panel Profiles:

All Raised and Flat Panel Profiles for Cope and Stick and Mitered Door Styles

 

Minimum Door Size:
7-1/4" x 7-1/4"

Minimum Drawer Size:
7-1/4" x 5-3/4"

V-105

Eligible Panel Profiles:

P-204; 1/4" Panel

 

Minimum Door Size:
7-1/4" x 6-1/2"

Minimum Drawer Size:
7-1/4" x 5"

V-106

Eligible Profiles:

MR365/MR465
MR374/MR474
MR376/MR476

 

V-107

Eligible Panel Profiles:

All Raised and Flat Panel Profiles for Cope and Stick and Mitered Door Styles

 

Minimum Door Size:
7-1/4" x 7-1/4"

Minimum Drawer Size:
7-1/4" x 5-3/4"

V-109

Eligible Panel Profiles:

P-201 Deep; P-217 Deep; P-209 Deep; P-204; 1/4" Panel

Minimum Door Size:
8-5/8" x 8-5/8"

Minimum Drawer Size:
8-5/8" x 7-1/8"

V-114

Eligible Panel Profiles:

P-201 Deep; P-217 Deep; P-209 Deep; P-204; 1/4" Panel

Minimum Door Size:
8-1/4" x 8-1/4"

Minimum Drawer Size:
8-1/4" x 6-3/4"

V-116

Eligible Panel Profiles:

P-204; 1/4" Panel

 

Minimum Door Size:
7-1/4" x 7-1/4"

Minimum Drawer Size:
7-1/4" x 5-1/2"

V-125

Eligible Panel Profile:

1/4" Panel

 

Minimum Door Size:
7-1/4" x 7-1/4"

Minimum Drawer Size:
7-1/4" x 5-3/4"

V-126

Eligible Panel Profiles:

P-204; 1/4" Panel

 

Minimum Door Size:
7-1/4" x 7"

Minimum Drawer Size:
7-1/4" x 5-1/2"

V-127

Eligible Panel Profiles:

1/4" Panel

 

Minimum Door Size:
7-1/4" x 7"

Minimum Drawer Size:
7-1/4" x 5-1/2"

Panel Profiles:

P201 deep

P209 deep

P217 deep

P204

1/4" Panel

Cope & Stick Door Styles End Panel Options:

  • Integral Ends
  • Wainscot Panels
  • [STANDARD] - Printed Maple Vinyl
  • Veneer - Interior surfaces are finished to match the face.
  • Plywood - Features a Birch Veneer with a Natural Finish.

PLEASE NOTE: The profile drawings that are featured are not to scale and are for illustrative purposes only.