This door features a raised panel. Are you looking for the flat panel version? See 411.
Construction: Cope & Stick Raised Panel: Frame: 2-1/4″; Center Panel: P223; Inside Edge Profile: SR42; Outside Edge Profile: E109; Drawer Front: Slab/DF109
Featured in Hickory: Oceanside
Select the image link to view materials in our stock finishes
Disclaimer: Please be aware that the accuracy of color shown on your computer screen will vary based on your monitor and screen resolution. Colors are also impacted by variations in the characteristics inherent to the specie. Finish selections should always be made after sourcing door and/or finish samples. The Valley Cabinet finish program is here to help personalize your selection to achieve the desired performance and look of your cabinetry. Our Experience. Your Signature.
There’s no questions about it. Cope and Stick joinery produces a great look for cabinet door frames. “Stick” is the molded edge cut along the frame’s inside edge. Any piece that meets that molding must match the profile by being “coped.” This subtle technique replaces the typical round-over profile with a clean and square corner. The tenon on Valley Cabinet's Cope and Stick doors and drawer fronts is 5/8″ long and provides the strongest joint available.
KEY ADVANTAGES:
Size Limitations:
311 Door: 2-1/4" rails
1/3 - 2/3 split
Minimum Sizes
2 1⁄4" Frame
Minimum: 7 1⁄4" x 15 3⁄4"
Midrail - Midrail FYI
To guarantee against warping, doors that are 48" or taller will automatically have a center rail added unless specified as “single panel" by the customer. Center rails are 2 1⁄2" wide unless otherwise specified and will match the inside edge profile. Doors over 24" wide with a single panel will not be warrantied. Standard frame size on 5-piece drawer fronts is 1 1⁄4" top and bottom rails with the stiles 2 1⁄4" wide to match the door unless otherwise specified. Wider or narrower frames are available upon request. If making the door 2 panels high, add a "5" to the door style name.
Drawer Fronts: Click to View our Selection of Drawer Inserts
Standard frame width on all Cope & Stick drawer fronts is 1 3⁄4".
Slab
| DF301
Minimum width: 7 1⁄4" | DF301(3-S)
Minimum width: 8 3⁄4" |
301H
Minimum width: 7 1⁄4" | 301 H(3)
Minimum width: 8 3⁄4" |
Click Here for details regarding Raised Panel 5-Piece Drawer Fronts, including panel options and minimum heights for specific rail sizes.
Hinging applies to the traditional framed construction of Valley Cabinet.
Note: Click on the individual diagrams to view an example of the profile in natural maple.
If adding mullions to your door style, you will need to reference the inside edge profile to select the coordinating mullion. Mullions are shown in the Mullion Options Tab.
 |
|  |
|
No mullion options available for this profile |  |
|  |
 |  |
*Restricted Outside Edge Profiles |  |
*Restricted Outside Edge Profiles |  |  |  |
 |  |
Note: Click on the individual diagrams to view an example of the panel in natural maple.
 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |  |
 |  |  |
Note: Click on the individual diagrams to view an example of the panel in natural maple. Note that all raised panel images feature an SR35 Inside Edge Profile. Consult the inside edge profile tab to see alternate options that are available for each door style.
P201 |
P202 |
P203 |
P204 P204 panels when reversed are designed to look like a flat panel when a consistent color match |
P207 |
P208 Not recommended for use with spray-on stains or any painted finish due to 1/8" reveal. |
P209 |
P210 |
P211 |
P217 |
P223 |
Mullion profiles coordinate with inside edge profiles. Consult the Mullion tab for details.
|
|
|
|
The connecting vertical mullion will be 3" long. Only available with SR10, SR20, SR30, SR35 & SR80 |
The connecting vertical mullion will be 3" long. Only available with SR10, SR20, SR30, SR35 & SR80 |
Not available with SR107 mullion |
The center diamond pattern will be connected to the frame on three sides with 2" long mullion pieces. Not available with SR70, SR86 or SR107 |
Oval is centered in the frame. 2" mullions on left/right and equal spacing for top/bottom. Available with SR10, SR20, SR30, SR35 & SR80 |
Oval has 2" mullions on left/right and top. Available with SR10, SR20, SR30, SR35 & SR80 |
Door style 392-WG will have size limitations for the “X” pattern mullion. Generally, if the height exceeds approximately 1.5 times the width then a double high “X” pattern is required. If the height exceeds approximately 2.5 times the width, then a triple high “X” pattern is required. The horizontal mullion dividing the “X” patterns is optional. For a large single “X” pattern, minimum width is 14". |
Only available with SR10, SR20, SR30, SR35 & SR80 |
Only available with SR10, SR20, SR30, SR35 & SR80 |
Only available with SR10, SR20, SR30, SR35 & SR80 |
Only available with SR10, SR20, SR30, SR35 & SR80 |
Only available with SR10, SR20, SR30, SR35 & SR80 |
|
Additional note for wireframe inserts: Antique finishes may have slight color variations to replicate the charm of natural aging and patina. Additional glass and wireframe styles are available, consult with your Valley Cabinet Design Specialist.
Cope & Stick Door Styles End Panel Options:
PLEASE NOTE: The profile drawings that are featured are not to scale and are for illustrative purposes only.
845 Prosper Street
De Pere, WI 54115
8:00 a.m. – 5:00 p.m.
Valley Cabinet Inc.
