Use MR375 for Raised Panel Styles and MR475 for Flat Panel Styles
Construction: MR475 Standard Miter: 3″ Frame; 1/4″ Center panel; DF475 Drawer Front.
Featured in Rift Cut White Oak: Rocky Road Matte (Low Gloss)
Select the image link to view materials in our stock finishes
Disclaimer: Please be aware that the accuracy of color shown on your computer screen will vary based on your monitor and screen resolution. Colors are also impacted by variations in the characteristics inherent to the specie. Finish selections should always be made after sourcing door and/or finish samples. The Valley Cabinet finish program is here to help personalize your selection to achieve the desired performance and look of your cabinetry. Our Experience. Your Signature.
A Mitered door looks similar to a picture frame with a clean line and square corners. All mitered joints from Valley Cabinet are constructed using a blind mortise and tenon that is 3/8″ thick by 1/2″ deep. The width of the mortise and tenon vary depending on the frame width of the door or drawer front.
KEY ADVANTAGES:
Please note, mitered doors will expand and contract in response to the environmental conditions. Our doors are made with a gap tolerance of up to .010 on the inside corner to allow for the expansion and contraction to occur.
Size Limitations:
Profile available only in 3" width
3" Frame
Raised Panel: 8 3⁄4" x 8 3⁄4"
¼" Flat Panel: 7" x 7"
Midrail - Midrail FYI
Midrail width is 2-1/2". Midrail widths are a fixed size and cannot be changed. If making the door 2 panels high, add a "5" to the door style.
DF375/DF475 Profile or Slab
Drawer Fronts: Click to View our Selection of Drawer Inserts
Standard frame width on all Mitered drawer fronts is 1 3⁄4".
Hinging applies to the traditional framed construction of Valley Cabinet.
MR375/MR475
Profile only available in 3" width
Click on drawing for image
MR475
 |
 |
 |
 |
 |
MR375
P201 |
P202 |
P203 |
P204 P204 panels are designed to look like a flat panel when a consistent color match |
P207 |
P208 Not recommended for use with spray-on stains or any painted finish due to 1/8" reveal. |
P209 |
P210 |
P211 |
P217 |
P223 |
Mullion Style: SR-35
3/4" width
|
|
|
The connecting vertical mullion will be 3" long |
|
|
Oval is centered in the frame. 2" mullions on left/right and equal spacing for top/bottom. Available with SR10, SR20, SR30, SR35 & SR80 |
Oval has 2" mullions on left/right and top. Available with SR10, SR20, SR30, SR35 & SR80 |
The center diamond pattern will be connected to the frame on three sides with 2" long mullion pieces |
|
Door style 392-WG will have size limitations for the “X” pattern mullion. Generally, if the height exceeds approximately 1.5 times the width then a double high “X” pattern is required. If the height exceeds approximately 2.5 times the width, then a triple high “X” pattern is required. The horizontal mullion dividing the “X” patterns is optional. For a large single “X” pattern, minimum width is 14". | |
Only available with SR10, SR20, SR30, SR35 & SR80 |
Only available with SR10, SR20, SR30, SR35 & SR80 |
Only available with SR10, SR20, SR30, SR35 & SR80 |
Only available with SR10, SR20, SR30, SR35 & SR80 |
Only available with SR10, SR20, SR30, SR35 & SR80 |
|
Additional note for wireframe inserts: Antique finishes may have slight color variations to replicate the charm of natural aging and patina. Additional glass and wireframe styles are available, consult with your Valley Cabinet Design Specialist.
Mitered Door Styles End Panel Options:
845 Prosper Street
De Pere, WI 54115
8:00 a.m. – 5:00 p.m.
Valley Cabinet Inc.
